technical data april , 201 1 , v e r . 0 4 low drop regulator for autom o tive d escription the ic is linear voltage regulator 5v with low dropout voltage typically 80 mv at light loads an d less then 400 mv at full loads, with better then 4 % output voltage accuracy. f eature ? voltage regulator 5v with 4 % output voltage accuracy ? low dropout voltage 0. 4 v max ? load current 150ma max ? over voltage & over temperature protection ? short current p rotection ? 60v load dump protection ? compliance with aec - q100 requirements p in description pin name function 01 vin input voltage 02 n.c. not connected 03 n.c. not connected 04 n.c. not connected 05 gnd ground 06 n.c. not connected 07 n.c. not connected 08 vout output regulator voltage 5 v ik8102 ordering information IK8102D so p - 8 t a = - 40 to 125 c for package 08 01 07 02 06 03 05 04 vin gnd v out
i k 8102 april , 201 1 , v e r . 0 4 functional diagram application schematic dimensioning information on external components the input capacitor c i is necessary for compensating line influences. the output capacitor c o is necessary for the stability of the regulating circuit. stability is guaranteed at values c i 10 f , c o 47 f and an esr 10? within the operating temperature range. vin gnd vout 10uf 47 uf 08 01 07 02 06 03 05 04
i k 8102 april , 201 1 , v e r . 0 4 maximum ratings (ta=25 o c) symbol characteristics rating units vin operating input voltage 29 v iout output current 150 ma ta operating temperature - 40 to 85 o c pd power dissipation 500 mw tj junction temperature 150 o c * stresses beyond those lis ted under ?absolute maximum ratings? may cause permanent damage to the device. these are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under ?recommended operating conditions? is not imp lied. exposure to absolute - maximum - rated conditions for extended periods may affect device reliability. dc electrical characterictics (unless otherwise specified vin=14v, iout=10ma, cout= 47 f, tj=25 o c) parameter symbol conditions min type max units voltage regulator output voltage vout iout = 1.0 ma 4. 95 5.0 5. 05 v output voltage vout 5.35v vin 26v 10ma iout 100ma 4.8 5.0 5.2 v voltage regulation reg - line 5.35v vin 26v 15 mv load regulation reg - load 10ma iout 100ma 100 mv dropout voltage vd iout =50ma iout = 1 00ma 0.2 0.4 v quiescent current iq iout =0 a 0.5 m a
i k 8102 april , 201 1 , v e r . 0 4 typical characteristics
i k 8102 april , 201 1 , v e r . 0 4
i k 8102 april , 201 1 , v e r . 0 4 pkg dimension d s uffix s oic (ms - 012aa) symbol min max a 4.80 5.00 b 3.80 4.00 c 1.35 1.75 d 0.33 0.51 f 0.40 1.27 g h j 0 8 no tes : k 0.10 0.25 1. dimensions a and b do not include mold flash or protrusion. m 0.19 0.25 2. maximum mold flash or protrusion 0.15 mm (0.006) per side p 5.80 6.20 for a; for b ? 0.25 mm (0.010) per s ide. r 0.25 0.50 1.27 5.72 dimens ion, mm a b h c k c m j f m p g d r x 45 seating plane 0.25 (0.010) m t -t- 1 8 4 5
|
